BancLok® MV 812-815
BN 1046 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for thermoplastics
| Headform |
Headform
Straight knurled
|
| Brand |
Brand
BancLok®
|
| Brandtype |
Brandtype
MV 812-815
|
| Material |
Material
Brass
|
| Surface |
Surface
plain
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
Additional information
Core hole d4 in injection molded parts: Taper = 0,5-1°, Nominal diameter = Middle hole
Features
| Headform |
Headform
Straight knurled
|
| Brand |
Brand
BancLok®
|
| Brandtype |
Brandtype
MV 812-815
|
| Material |
Material
Brass
|
| Surface |
Surface
plain
|
Assembly notice
1. Place shoulder of insert into pre-drilled hole.
2. Press in the insert by using a setting punch with pilot.
3. Fasten the workpiece with screw:
- The cup point or the ribbing anchored firmly while screwing in the wall of the hole.
- The residual strength acts as a screw locking.